Choose a state

Industrialized Building Contracting (2020-12-18)

Industrialized Building Contracting (Abbr: IBC) means that service that provides for the installation or removal of an industrialized building as defined in the Virginia Industrialized Building Safety Regulations. This classification covers foundation work in accordance with the provisions of the USBC and allows the licensee to complete internal tie-ins of plumbing, gas, electrical, and HVAC systems. It does not allow for installing additional plumbing, gas, electrical, or HVAC work such as installing the service meter, or installing the outside compressor for the HVAC system. The BLD classification also provides for this function.

Questions - 50
Minimum Passing Score of 70%
Time Allowed - 120 Minutes

The reference material listed below was used to prepare the questions for this examination.  The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available.  For Code questions, the examinations will be based only on the edition of the Code book that is listed.

These products apply to test outline dated 2020-12-18

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin



Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

  • Open Book In Stock

    Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders

    3rd Edition
    Publication Year: March 2006

    $45.00

    This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.

  • Open Book In Stock

    Pipe and Excavation Contracting 2011

    Publication Year: 2011

    $50.00

    This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

  • Open Book In Stock

    Placing Reinforcing Bars, 10th Edition

    $90.00

    This unique and popular publication presents the best accepted current practices in placing reinforcing bars in structures and pavement. It is written for apprentices, journeymen ironworkers, and inspectors. A definitive resource for preparing provisions in project specifications. Eighteen heavily illustrated chapters cover topics including types of materials, handling of bars at the jobsite, general principles for bar placing, splicing, and tying, bar placement in footings, walls, columns, floors, roofs, pavement and transportation structures. Also includes a chapter on epoxy and other coated reinforcement.

  • Open Book In Stock

    Blank Quick Reference Tabs

    $13.00

  • Open Book Out of Stock

    ASME B30.3 - Construction Tower Cranes

    2012 Edition

    $63.25

    B30.3 applies to “construction tower cranes” and “permanently mounted tower cranes” that are powered by electric motors or internal combustion engines and that adjust their operating radius by means of a luffing boom mechanism, a trolley traversing a horizontal jib, or a combination of the two. The cranes may be mounted on “fixed bases” or “traveling bases” and may have tower and supporting structure arrangements that permit the crane to climb in a structure being built or that permits’ increasing the crane’s tower height as the structure rises. Variations of the above physical characteristics that provide the same fundamental operating characteristics are included in the scope of this Volume however, the requirements of this Volume are only applicable to the cranes within this scope when they are used in lifting operations. Mobile cranes configured with tower attachments (refer to ASME B30.5) and self-erecting tower cranes (refer to ASME B30.29) are not within the scope of this Volume.

  • Open Book Out of Stock

    ASME B30.4 - Portal and Pedestal Cranes

    2010 Edition

    $67.85

    B30.4 applies to the construction, installation, operation, inspection, and maintenance of electric motor or internal-combustion engine powred portal and pedestal cranes, that adjust operating radius by means of a boom luffing mechanism or by means of a trolley traversing a horizontal boom, that may be mounted on a fixed or traveling base, and to any variation thereof that retain the same fundamental characteristics. This standard applies only to portal and pedestal cranes utilizing a drum and wire rope for hoisting and which are used for hoisting work. The requirements for tower cranes (refer to ASME B30.3), telescopic boom cranes (refer to ASME B30.5), and knuckleboom cranes (refer to ASME B30.22) are not included in this standard.

  • Open Book In Stock

    Virginia Occupational Safety and Health Program (VOSH)

    $24.50

  • Open Book In Stock

    ASME B30.5 Mobile and Locomotive Cranes

    Publication Year: 2007
    Edition

    $130.00

    ASME B30.5 is widely respected and applied throughout the building and construction industry. It addresses crawler cranes, locomotive cranes, wheel-mounted cranes, and any variations thereof that retain the same fundamental characteristics and are powered by internal combustion engines or electric motors. The scope of this Safety Standard includes only cranes of the above types that are powered by internal combustion engines or electric motors. Side boom tractors and cranes designed for railway and automobile wreck clearance, digger derricks, cranes manufactured specifically for, or when used for, energized electrical line service, knuckle boom, trolley boom cranes, and cranes having a maximum rated capacity of one ton or less are excluded.

  • Open Book In Stock

    Handbook of Rigging: For Construction and Industrial Operations

    Publication Year: 2009
    5th Edition

    $120.00

    Since 1957 successive editions of the Handbook of Rigging for Construction and Industrial Operations have delivered proven solutions for erecting reliable rigs and scaffolds for plants and factories, loading docks, mines and ports, and construction and demolition sites. Complete with extensive coverage of relevant OSHA regulations plus the author's own expert advice on safe practices, this definitive guide shows you how to select and use: rigging tools--fiber and wire-strand rope, slings and hitches, end attachments and fittings, and blocks, sheaves, reeving, and drums-scaffolding and ladders--both manual and powered swinging and suspended scaffolds, wood and metal stationary scaffolds, specialized scaffolds, and portable ladders, rigging machinery--derricks and cranes, overhead hoists, personnel/material hoists, and helicopters, rigging accessories--jacks, rollers, and skids plus safety belts, lifelines, and nets.

  • Open Book Out of Stock

    ASME B30.10 - Hooks

    2009 Edition

    $66.70

    B30.10 includes provisions that apply to hooks used for lifting and load handling purposes, in conjunction with equipment described in other volumes of the B30 Standard. Hooks supporting a load in the base (bowl/saddle or pin hole) of the hook, are covered in Chapter 10-1. Hooks that may be loaded in other than the base (bowl/saddle or pin hole)are covered in Chapter 10-2.This safety standard offers comprehensive solutions applying to the fabrication, attachment, use, inspection, and maintenance of this equipment.

  • Open Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024

    Publication Year: 2024

    $32.00

    The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

  • Open Book In Stock

    Carpentry and Building Construction, 2016 Student Edition

    Publication Year: 2016

    $105.00

    **IN STOCK**

    Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

  • Open Book In Stock

    International Building Code Turbo Tabs 2018

    Publication Year: 2018

    $18.00

    2018 IBC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Building Code printed on them in an easy-to-read format. Can be used with either the 2018 International Building Code or the 2018 IBC Code and Commentary.

  • Open Book In Stock

    Design and Control of Concrete Mixtures 17th Edition

    Publication Year: 2021
    17th Edition

    $135.00

    Design and Control of Concrete Mixtures, 17th Edition is the definitive guide for engineers, contractors, producers, instructors, and students. This new edition reflects the latest advances in concrete technology and highlights concrete’s contribution to sustainability. Provides guidance on all aspects of concrete technology from selection of suitable materials to designing and proportioning a concrete mixture.

    Backed by over 100 years of research by the Portland Cement Association and other industry groups.

    Reflects the latest guidance on standards, specifications, and test methods of ASTM International (ASTM), the American Association of State Highway and Transportation Officials (AASHTO), and the American Concrete Institute (ACI).

    Presenting a 40% increase in new information, including two new chapters on imperfections in concrete and innovations in concrete technology.

  • Open Book In Stock

    SDI (Manual of Construction with Steel Deck) Edition 3

    Publication Year: 2017
    3RD Edition

    $50.00

     

    The new Third Edition of the Steel Deck Institute Manual of Construction with Steel Deck (MOC3) continues the tradition established by earlier editions to provide information necessary for the proper field usage of steel deck. This edition is reformatted for easier use with updated references, including those for the SDI QA/QC Standard for Quality Control and Quality Assurance for Installation of Steel Deck.

  • Open Book In Stock

    BCSI: Guide to Good Practice for Handling, Installing, Restraining, and Bracing of Metal Plate Connected Wood Trusses 2018

    Publication Year: 2018

    $49.00

    BCSI includes information and guidance pertaining to diagonal bracing for web members with two rows of lateral restraint, as well as permanent lateral restraint and diagonal bracing guidance for trusses spaced wider than 2' o.c. With references to building codes, standards and OSHA regulations, BCSI consists of ten chapters that contain the most current information regarding the handling, installing, restraining, and bracing of metal plate connected wood trusses.

  • Open Book In Stock

    International Building Code 2018

    Publication Year: 2018

    $155.00

    The scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories. For the most current adoptions details go to International Code Adoptions The 2018 IBC contains many important changes such as:Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory. New code sections have been introduced addressing medical gas systems and higher education laboratories. Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height. Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway. The occupant load factor for business uses has been revised to one occupant per 150 square feet. Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served. The minimum lateral load that fire walls are required to resist is five pounds per square foot. Wind speed maps updated, including maps for the state of Hawaii. Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds. Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values). Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed. New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail. Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

  • Open Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2023

    $29.50

    All Federal Construction Regulations (29 CFR 1926) are included in this “perfect bound” book in an easy-to-read, two-color layout.

    All 29 CFR 1926 regulations for construction industry are included along with the following items:

    29 CFR 1903 regulations covering inspections, citations, and penalties
    29 CFR 1904 regulations covering recording and reporting occupational injuries and illnesses
    OSHA keyword dictionary
    Easy to find OSHA interpretations