Oil and Gas Fields Contractor (2022-05-24)

This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

This second edition covers state-of-the-art asphalt paving, plant operations, transportation of materials, surface preparation, lay down, compaction, and quality control processes. It is aimed at field personnel who are responsible for these operations—both contractor personnel who do the work and agency personnel who oversee and inspect the work.

Includes all addendum's.This standard is designed to provide the petroleum industry with tanks of adequate safety and reasonable economy for use in the storage of petroleum, petroleum products, and other liquid products commonly handled and stored by the various branches of the petroleum industry. It is intended to help purchasers and manufacturers in ordering, fabricating, and erecting tanks. Standard 650, Tenth Edition, covers material, design, fabrication, erection, and testing requirements for vertical, cylindrical, above ground, closed- and open-top, welded steel storage tanks in various and capacities for internal pressures approximating atmospheric pressure, but a higher internal pressure is permitted when additional requirements are met. This standard applies only to tanks whose entire bottom is uniformly supported; and to tanks in non-refrigerated service, that have a maximum operating temperature of 90 deg C (200 deg F).

Since 1957 successive editions of the Handbook of Rigging for Construction and Industrial Operations have delivered proven solutions for erecting reliable rigs and scaffolds for plants and factories, loading docks, mines and ports, and construction and demolition sites. Complete with extensive coverage of relevant OSHA regulations plus the author's own expert advice on safe practices, this definitive guide shows you how to select and use: rigging tools--fiber and wire-strand rope, slings and hitches, end attachments and fittings, and blocks, sheaves, reeving, and drums-scaffolding and ladders--both manual and powered swinging and suspended scaffolds, wood and metal stationary scaffolds, specialized scaffolds, and portable ladders, rigging machinery--derricks and cranes, overhead hoists, personnel/material hoists, and helicopters, rigging accessories--jacks, rollers, and skids plus safety belts, lifelines, and nets.

API Standard 620 covers the design and construction of large, welded, field-erected low-pressure carbon steel above ground storage tanks (including flat-bottom tanks) with a single vertical axis of revolution.The rules presented in this standard cannot cover all details of design and construction because of the variety of tank sizes and shapes that may be constructed. Where complete rules for a specific design are not given, the intent is for the manufacturer-subject to the approval of the purchaser's authorized representative-to provide design and construction details that are as safe as those which would otherwise be provided by this standard.The tanks described in this standard are designed for metal temperatures not greater than 250 F and with pressures in their gas or vapor spaces not more than 15 pounds per square inch gauge.The basic rules in this standard provide for installation in areas where the lowest recorded one-day mean atmospheric temperature is -50 F. Appendix R covers low-pressure storage tanks for refrigerated products at temperatures from +40 F to -60 F. Appendix Q covers low-pressure storage tanks for liquefied hydrocarbon gases at temperatures not lower than -270 F.The rules in this standard are applicable to tanks that are intended to (a) hold or store liquids with gases or vapors above their surface or (b) hold or store gases or vapors alone. These rules do not apply to lift-type gas holders.Although the rules in this standard do not cover horizontal tanks, they are not intended to preclude the application of appropriate portions to the design and construction of horizontal tanks designed in accordance with good engineering practice. The details for horizontal tanks not covered by these rules shall be equally as safe as the design and construction details provided for the tank shapes that are expressly covered in this standard.

The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

Modern Welding is a comprehensive text that has long been the standard for teaching theory, fundamentals, equipment, and techniques of welding technology, with enough information to span a two-year curriculum. Covering all of the information required for complete AWS SENSE Level 1 and Level 2 certification, this text includes shielded metal arc welding, gas metal arc welding, flux cored arc welding, gas tungsten arc welding, oxyfuel gas welding and cutting, various thermal cutting processes, testing and inspection, welding symbol interpretation, and print reading. The text also includes Nonstandard Terminology features, introducing students to the jargon commonly used in the welding industry to help them communicate effectively on the job. 

• Includes 30 step-by-step procedures that guide students through challenging welding-related operations
• Features a time-saving Quick Reference Table of Contents that directs students to the specific reference tables in the book
• Presents safety information in bold red type throughout the text to reinforce and highlight this critical information