Choose a state
S-5 Limited Heating, Hot Water, and Steam Contractor (2024-07-24)
The holder of this license may perform the installation, repair, replacement, maintenance or alteration of any apparatus of piping, appliances, devices or accessories for heating systems, boilers, including apparatus and piping for the generation or conveyance of steam and associated pumping equipment and oil burner installation and servicing (excluding sheet metal work, air conditioning and refrigeration systems). This license also covers the installation of hot, chilled and condenser water, as well as steam piping in air conditioning systems. The requirements to qualify for this license examination shall be two (2) years as a properly licensed journeyperson or equivalent experience and training.
40 Questions
70% Minimum Passing score
90 Minutes
The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.
Click Here to View the Candidate Information Bulletin
Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.
-
Closed Book In Stock
Pipefitter's Handbook, 1967 3rd Edition
3rd Edition
Publication Year: 1967
$55.00
Compact and pocket-sized, this handy reference contains thousands of facts and figures relevant to pipefitters, steamfitters-anyone concerned with layout and installation of pipe.
-
Open Book In Stock
International Mechanical Code Turbo Tabs 2021
$15.63
Flip through the 2021 IMC and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.
Loose Leaf Tabs Contain: Full-page inserts tabs that have the key code sections printed on them in an easy-to-read format.
Soft Cover Tabs Contain: Clear plastic, self-adhesive tabs that have the key sections of the code printed on them in an easy-to-read format.
-
Closed Book In Stock
Modern Hydronic Heating & Cooling for Residential and Light Commercial Buildings 4th Edition
4th Edition
$250.00
From simple applications to multi-load and multi-temperature systems, this one-of-a-kind, comprehensive text prepares readers to use the latest hydronics to create systems that deliver the ultimate in comfort, reliability and energy efficiency. Abundantly illustrated with product and installation photos and hundreds of detailed, full-color schematics, MODERN HYDRONIC HEATING, Fourth Edition, transforms engineering-level design information into practical applications useful for technical students and heating professionals alike. The revised edition features the latest design and installation techniques for residential and light commercial hydronic systems, including use of renewable energy heat sources such as air-to-water and geothermal heat pumps, hydraulic separation, variable speed circulators, distribution efficiency, heat exchangers, buffer tanks, heat metering, hydronic cooling, system balancing and proper system documentation. Anyone involved in the heating trade will benefit from this preeminent resource of the North American heating industry, which is equally well-suited for formal education courses, self-study or on-the-job reference.
-
Closed Book In Stock
Carrier System Design Manual Part 3 - Piping Design
Publication Year: 1973
$76.00
This part of the System Design Manual presents data and examples to guide the engineer in practical design and layout of normal air conditioning piping systems.
-
Open Book In Stock
International Mechanical Code 2021
$100.00
Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design.
Important changes in the edition include:
Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building.
Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits.
Fire and smoke dampers must be provided with approved access for inspection and maintenance.
Refrigerant tables updated to include new refrigerants.
Addition of condensate termination identification markings and discharge restrictions.
Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement.
30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems.
Continuous operation requirement for manicure and pedicure station exhaust systems.
Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan. -
Open Book In Stock
Modern Refrigeration and Air Conditioning 22nd Edition
$180.00
Modern Refrigeration and Air Conditioning bridges the gap between students and technicians, maintaining a high standard of quality in covering both fundamental principles and the latest technologies. This esteemed resource boasts a fresh instructional design that effectively combines theory, skill development, and service techniques to equip students with the knowledge needed to install and service refrigeration and HVAC systems. With the most current technical content, a logical and progressive structure, rich learning pedagogy, superior visuals, readability, and a focus on career and workplace readiness, it is ideal for today’s learners.
