Swimming Pool Construction Contracting (2020-12-22)

This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

2018 IBC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Building Code printed on them in an easy-to-read format. Can be used with either the 2018 International Building Code or the 2018 IBC Code and Commentary.

The scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories. For the most current adoptions details go to International Code Adoptions The 2018 IBC contains many important changes such as:Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory. New code sections have been introduced addressing medical gas systems and higher education laboratories. Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height. Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway. The occupant load factor for business uses has been revised to one occupant per 150 square feet. Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served. The minimum lateral load that fire walls are required to resist is five pounds per square foot. Wind speed maps updated, including maps for the state of Hawaii. Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds. Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values). Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed. New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail. Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

This guide provides information on materials and properties of both dry-mix and wet-mix shotcrete. Most facets of the shotcrete process are covered, including application procedures, equipment requirements, and responsibilities of the shotcrete crew. Other aspects, such as pre-construction trials, craftsman qualification tests, materials tests, and finished shotcrete acceptance tests, are also discussed.

The only comprehensive swimming pool code coordinated with the current requirements in the I-Codes and APSP standards. Developed with the Association of Pool & Spa Professionals (APSP), the ISPSC will establish minimum regulations for public and residential pools, spas, and hot tubs using prescriptive and performance-related provisions. The ISPSC integrates seamlessly with the family of I-Codes and contains requirements that meet or exceed the Virginia Graeme Baker Act. The ISPSC also contains APSP-7 Standard for Suction Entrapment Avoidance. For the most current adoptions details go to International Code Adoptions

This unique and popular publication presents the best accepted current practices in placing reinforcing bars in structures and pavement. It is written for apprentices, journeymen ironworkers, and inspectors. A definitive resource for preparing provisions in project specifications. Eighteen heavily illustrated chapters cover topics including types of materials, handling of bars at the jobsite, general principles for bar placing, splicing, and tying, bar placement in footings, walls, columns, floors, roofs, pavement and transportation structures. Also includes a chapter on epoxy and other coated reinforcement.

Design and Control of Concrete Mixtures, 17th Edition is the definitive guide for engineers, contractors, producers, instructors, and students. This new edition reflects the latest advances in concrete technology and highlights concrete’s contribution to sustainability. Provides guidance on all aspects of concrete technology from selection of suitable materials to designing and proportioning a concrete mixture.

Backed by over 100 years of research by the Portland Cement Association and other industry groups.

Reflects the latest guidance on standards, specifications, and test methods of ASTM International (ASTM), the American Association of State Highway and Transportation Officials (AASHTO), and the American Concrete Institute (ACI).

Presenting a 40% increase in new information, including two new chapters on imperfections in concrete and innovations in concrete technology.

The Pool/Spa Operator™ Handbook, proves to be an invaluable resource and reference for both the novice and professional.