Choose a state

B-3 (CR-61) Limited Remodeling and Repair Contractor (Residential/Commercial) (2022-01-20)

Remodeling or repair of an existing residential structure or appurtenance except for electrical, plumbing, mechanical, boilers, swimming pools or spas and water wells, which must be subcontracted to an appropriately licensed contractor. The scope of work allowed under the CR7 carpentry classification is included within this scope. This classification does not include work authorized by the A, B1, or B2 scopes.

For projects of $50,000 or less, this classification allows the licensee, on existing structures, to install or repair rough carpentry, finish carpentry, roofing, hardware, millwork, metal studs, metal doors or door frames. Work related to electrical, plumbing, air conditioning systems, boilers, swimming pools, spas and water wells must be subcontracted to an appropriately licensed contractor.

70 Questions
70% Minimum Passing Score
180 Minutes Time Allowed

The reference material listed below was used to prepare the questions for this examination.  The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available.  For Code questions, the examinations will be based only on the edition of the Code book that is listed.

These products apply to test outline dated 2022-01-20

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin



Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

  • Closed Book In Stock

    Pipe and Excavation Contracting 2011

    Publication Year: 2011

    $50.00

    This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.

  • Closed Book In Stock

    Painting and Decorating Craftsman's Manual and Textbook

    Publication Year: 1995
    8th Edition

    $135.00

    An informative review of architectural, commercial, and industrial painting practices. Discusses coating materials, surface preparation, application methods and equipment, rigging, safety, coating failures, wall coverings, and more. Published by the Painting and Decorating Contractors of America (PDCA).

  • Open Book In Stock

    International Building Code Turbo Tabs 2018

    Publication Year: 2018

    $18.00

    2018 IBC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Building Code printed on them in an easy-to-read format. Can be used with either the 2018 International Building Code or the 2018 IBC Code and Commentary.

  • Open Book In Stock

    International Building Code 2018

    Publication Year: 2018

    $160.00

    The scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories. For the most current adoptions details go to International Code Adoptions The 2018 IBC contains many important changes such as:Accessory storage spaces of any size are now permitted to be classified as part of the occupancy to which they are accessory. New code sections have been introduced addressing medical gas systems and higher education laboratories. Use of fire walls to create separate buildings is now limited to only the determination of permissible types of construction based on allowable building area and height. Where an elevator hoistway door opens into a fire-resistance-rated corridor, the opening must be protected in a manner to address smoke intrusion into the hoistway. The occupant load factor for business uses has been revised to one occupant per 150 square feet. Live loads on decks and balconies increase the deck live load to one and one-half times the live load of the area served. The minimum lateral load that fire walls are required to resist is five pounds per square foot. Wind speed maps updated, including maps for the state of Hawaii. Terminology describing wind speeds has changed again with ultimate design wind speeds now called basic design wind speeds. Site soil coefficients now correspond to the newest generation of ground motion attenuation equations (seismic values). Five-foot tall wood trusses requiring permanent bracing must have a periodic special inspection to verify that the required bracing has been installed. New alternative fastener schedule for construction of mechanically laminated decking is added giving equivalent power-driven fasteners for the 20-penny nail. Solid sawn lumber header and girder spans for the exterior bearing walls reduce span lengths to allow #2 Southern Pine design values.

  • Closed Book In Stock

    Roofing Construction & Estimating Revised

    $52.00

    The step-by-step, hands-on guide to any type of roofing on residential and commercial buildings. Covers everything from underlayment to shingles to roof coatings. Includes tips and tried-and-tested installation methods. Loaded with job-site photos, sketches and diagrams to make the procedures clear. The result: Your clients get an attractive, durable roof that provides top value, nearly eliminates callbacks and builds your reputation as a knowledgeable roofing pro.

  • Open Book In Stock

    International Residential Code for One and Two Family Dwellings Turbo Tabs 2018

    Publication Year: 2018

    $18.00

    2018 IRC Turbo Tabs consists of clear plastic self-adhesive tabs that have key sections of the 2018 International Residential Code printed on them in an easy-to-read format. Can be used with either the 2018 International Residential Code or the 2018 IRC Code and Commentary.

  • Open Book In Stock

    International Residential Code for One and Two Family Dwellings 2018

    Publication Year: 2018

    $160.00

    This comprehensive code comprises all building, plumbing, mechanical, fuel gas and electrical requirements for one- and two-family dwellings and townhouses up to three stories. For the most current adoptions details go to International Code AdoptionsThe IRC contains many important changes such as:An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable.The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall.An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening.The exemption for interconnection of smoke alarms in existing areas has been deleted.New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine.New tables address alternative wood stud heights and the required number of full height studs in high wind areas.

  • Closed Book In Stock

    Walker's Insulation Techniques and Estimating Handbook

    Publication Year: 1983

    $0.00

    *THIS BOOK IS NO LONGER IN PRINT AND IS NO LONGER AVAILABLE TO PURCHASE*

  • Closed Book In Stock

    Standard Practice for Installation of Rigid Poly Vinyl Chloride PVC Siding & Soffit ASTM D 4756

    Publication Year: 2006

    $95.00

    This practice covers the minimum requirements for and the methods of installation of rigid vinyl siding, soffits, and accessories on the exterior wall and soffit areas of buildings. This practice also covers aspects of installation relating to effectiveness and durability in service. Materials to be used in the installation shall include horizontal wall sliding, vertical wall sliding, soffit panels, accessories such as starter strip, corner posts, and trim channels, and fasteners such as nails, staples, and screws. The installation method includes the following steps: substrate, surface preparation, application of horizontal sliding, application of vertical sliding, application of soffits and fascia and application of special details.

  • Open Book In Stock

    Blank Quick Reference Tabs

    $13.00

  • Closed Book In Stock

    Gypsum Construction Handbook 7th Edtion

    Publication Year: 2014

    $75.00

    The tried-and-true Gypsum Construction Handbook is a systematic guide to selecting and using gypsum drywall, veneer plaster, tile backers, ceilings, and conventional plaster building materials. A widely respected training text for aspiring architects and engineers, the book provides detailed product information and efficient installation methodology. The Seventh Edition features updates in gypsum products, including ultralight panels, glass-mat panels, paperfaced plastic bead, and ultralightweight joint compound, and modern specialty acoustical and ceiling product guidelines. This comprehensive reference also incorporates the latest in sustainable products.

  • Closed Book In Stock

    Carpentry and Building Construction, 2016 Student Edition

    Publication Year: 2016

    $105.00

    **IN STOCK**

    Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.

  • Closed Book In Stock

    Handbook for Ceramic Tile Installation 2024

    $80.00

    A guide to assist in clarifying and standardizing installation specifications for tile. Each installation recommendation, or method, requires a properly designed, constructed, and prepared substructure using materials and construction techniques that meet nationally recognized material and construction standards. Included are: product selection guides for ceramic, glass, and stone tiles; guidelines for wet areas; ISO mortar and grout specifications; information on substrate flatness requirements; information on grout joint sizes and patterns, and workmanship standards excerpted from ANSI installation standards.

  • Closed Book In Stock

    Contractors Guide to Quality Concrete Construction 4th Edition

    Publication Year: 2018
    4th Edition

    $125.00

    This document is published jointly by the American Concrete Institute (ACI) and the American Society of Concrete Contractors (ASCC). It has been reviewed in accordance with the Educational Committee Manual document review procedures of the ACI Educational Activities Committee. ACI and ASCC reports are intended for guidance in planning, designing, executing, and inspecting construction. This document is intended for the use of individuals who are competent to evaluate the significance and limitations of its content and recommendations and who will accept responsibility for the application of the material it contains.

    Now 262 pages – over 100 pages longer than the previous edition – the guide includes full-color photos and illustrations, a new, easier-to-read layout, and substantial content updates. Also included in the fourth edition are 43 Position Statements from ASCC, details on ACI Certification programs, and an appendix introducing several legal issues of interest to concrete contractors. A summary, review questions, and additional recommended reading list accompany each of the 12 chapters.

    Published 2018

  • Open Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024

    Publication Year: 2024

    $32.00

    The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

  • Closed Book In Stock

    Modern Masonry: Brick, Block, Stone 9th Edition

    Publication Year: 2020

    $125.00

    Modern Masonry: Brick, Block, Stone provides a broad understanding of the properties and applications of masonry materials. It begins with coverage on careers to help students learn about the industry. It then progresses to teaching safe and proper procedures for working with brick, block, and stone. Coverage of concrete form construction and flatwork is also included. Green features address specific topics relating to masonry’s impact on the environment.