Choose a state

C-1 Plumbing and Heating Contractor (2018-03-29)

A person who holds a classification C-1 license may perform any of the work authorized for the subclassifications of the classification C-1 license, including: the installation of boilers and pipes for hot water and steam, including all related fittings, valves, gauges, pumps, radiators, convectors, tanks and lines for fuel oil, chimneys, flues, insulation and other appurtenances; the fabrication and installation of all systems of sprinklers for protection from fire, including the appurtenances; the insulation of pipes, ducts and related equipment. A C-1 licensee may also perform the installation and maintenance of material and fixtures to create sanitary conditions in buildings by providing a permanent means for a supply of safe water and any sanitary waste and vent systems that are required to ensure the appropriate removal of waste from these buildings; drainage systems for roofs; hydronic heating systems not exceeding 200,000 British thermal units; systems of landscape irrigation; systems to heat potable water, including, without limitation, solar equipment; a permanent means to supply gas for residential and industrial purposes; and pipes for compressed air, vacuums and gases for medical use. A C-1 licensee may also perform the selection, cutting, shaping, fabrication and installation of sheet metal, including, without limitation, cornices, flashings, gutters, leaders, downspouts for rainwater, pans, food service equipment, ducts, louvres, patented chimneys, flues, and metal roof systems. A C-1 licensee may also perform the fabrication and installation of systems for the heating, evaporative cooling and circulation of air, including, without limitation, the installation of solar equipment for that purpose; the installation of pipes from the source of supply of liquefied petroleum and natural gas into a building or structure and the installation of the related vents; the installation, replacement and repair of water heaters, including the connection to existing lines for potable water and gas, the necessary venting and other incidental connections; the fabrication, installation, repair and removal of pipes, pumps, valves and other equipment used in the transfer of chilled water for the control of temperature; the installation, replacement and repair of systems to replenish breathing air for firefighters; and the fabrication, installation, repair and removal of pipes and equipment used for the transmission of water, steam, gas, chemicals, food and other substances for industrial use.

120 Questions
70% Minimum Passing Score
5 Hours

These products apply to test outline dated 2018-03-29

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin

Email this page to a friend

Your Name:
Friend's Email Address:

Add a message:




Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.

  • Open Book

    NFPA 13: Installation Of Sprinkler Systems 2007

    Publication Year: 2007

    $130.00

    This standard provides a range of sprinkler system approaches, design development alternatives, and component options that are all acceptable. Building owners and their designated representatives are advised to carefully evaluate proposed selections for appropriateness and preference. 1.1.1 This standard shall provide the minimum requirements for the design and installation of automatic fire sprinkler systems and exposure protection sprinkler systems covered within this standard. 1.1.2 This standard is written with the assumption that the sprinkler system shall be designed to protect against a single fire originating within the building.

  • Closed Book

    Mathematics for Plumbers and Pipefitters 8th Edition

    8th Edition

    $193.00

    Fully updated for optimal learning, Mathematics for Plumbers and Pipe-fitters, 8E remains a trusted resource for essential math concepts in the plumbing and pipe-fitting trades. With an emphasis on real-world examples that will prepare readers to successfully transfer their knowledge to on-the-job situations, this book utilizes the most currently used fitting materials to demonstrate key concepts. Simplified, clear explanations and a straightforward approach, combined with new units on changes of state, pressure and heat, and mechanical advantage, make this an ideal tool for anyone entering the field.

  • Closed Book

    Modern Hydronic Heating for Residential and Light Commercial Buildings 3rd Edition

    3rd Edition
    Publication Year: 2011

    $216.83

    From simple applications to multi-load / multi-temperature systems, learn how to use the newest and most appropriate hydronic heating methods and hardware to create system the deliver the ultimate in heating comfort, reliability, and energy efficiency. Heavily illustrated with product and installation photos, and hundreds of detailed full-color schematics, MODERN HYDRONIC HEATING, 3rd EDITION is a one-of-a-kind comprehensive reference on hydronic heating for the present and future. It transforms engineering-level design information into practical tools that can be used by technical students and heating professional alike. This revised edition features the latest design and installation techniques for residential and light commercial hydronic systems including use of renewable energy heat sources, hydraulic separation, smart circulators, distribution efficiency, thermal accumulators, mixing methods, heat metering, and web-enabled control methods. Everyone involved in the heating trade will benefit from this preeminent resource of the North American heating industry. It is well-suited for use in a formal education course, self-study, or as an on the job reference.

  • Closed Book

    Solar Water and Pool Heating Design and Installation Manual

    Rev 1992 Edition
    Publication Year: 1997

    $10.00

    The intent of this manual is to equip the reader with the knowledge and skills needed todesign, install, operate and maintain the most common types of solar water heating systems.The manual serves as the textbook for the solar thermal course sponsored and conducted bythe Florida Solar Energy Center. It also functions as a study guide for those intending to takelicensing or certification exams.The manual presents an overview of solar thermal applications, provides basic informationon the principles of solar energy, reviews solar thermal technologies, and provides detailedinstruction on the safe, efficient installation of solar water heating and pool heating systems.The manual is divided into six sections, with each separated into individual modules.

  • Open Book

    Blank Quick Reference Tabs

    $10.16

  • Closed Book

    Uniform Plumbing Code Tabs

    $15.00

    User-friendly and up-to-date, these Uniform Plumbing Code (UPC) Tabs are a great way to organize the UPC 2009. These self-adhesive tabs can reduce the time spent searching to find key information. Tabs are durable and allow for positioning adjustments after being placed on the code paper. Affordable and time-saving, these are a must-have for UPC users.

  • Closed Book

    Facility Piping Systems Handbook 3rd Edition

    3rd Edition

    $165.00

    Fully up-to-date with the latest codes and standards, this practical resource contains everything you need to plan, select, design, specify, and test piping systems for industry, commercial, and institutional applications. The book includes complete coverage of pipes, fittings, valves, jointing methods, hangers, supports, pumps, tanks, and other required equipment.

    Facility Piping Systems Handbook, Third Edition, progresses from fundamentals of systems operation to a design procedure that allows quick and accurate component and pipe sizing. Listings of FDA, EPA, and OSHA requirements are included. Complete with formulas, charts, and tables, this invaluable all-in-one volume will save you time and money on the job.

  • Closed Book

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2020

    Publication Year: 2020

    $26.78

    All Federal Construction Regulations (29 CFR 1926) are included in this “perfect bound” book in an easy-to-read, two-color layout.

    All 29 CFR 1926 regulations for construction industry are included along with the following items:

    29 CFR 1903 regulations covering inspections, citations, and penalties
    29 CFR 1904 regulations covering recording and reporting occupational injuries and illnesses
    OSHA keyword dictionary
    Easy to find OSHA interpretations

  • Open Book

    Uniform Plumbing Code 2012

    2012 Edition

    $120.00

    The UPC established minimum requirements and standards for the protection of the public health, safety and welfare. 101.2 Scope. The provisions of this code shall apply to the erection, installation, alteration, repair, relocation, replacement, addition to, use, or maintenance of plumbing systems within this jurisdiction. Includes all potable water, building supply, and distribution pipes; all plumbing fixtures and traps; all drainage and vent pipes; and all building drains, and building sewers, including their respective joints and connections, devices, receptors, and appurtenances within the property lines of the premises and shall include potable water piping, potable water treating or using equipment, medical gas and medical vacuum systems, liquid and fuel gas piping, and water heaters and vents for same.

  • Open Book

    Uniform Mechanical Code 2012

    $115.00

    Uniform Mechanical Code 2012 provides complete requirements for the installation and maintenance of heating, ventilating, cooling and refrigeration systems, while at the same time allowing latitude for innovations and new technologies.

  • Open Book

    NFPA 54: National Fuel and Gas Code 2012 Edition

    Publication Year: 2012

    $71.00

    2012 NFPA 54: National Fuel Gas Code provides revised, industry accepted guidance for the safe installation and operation of gas piping systems, appliances, equipment, and accessories.

  • Open Book

    NFPA 58: Liquefied Petroleum Gas Code 2014

    Publication Year: 2014

    $71.00

    Liquefied Petroleum Gas Code provides minimum safety requirements for all liquefied petroleum gas (propane) installations, from small cylinders installed at residences to large bulk storage facilities that can exceed 100,000 gallons. The code includes minimum requirements for safe handling during LP gas transfer, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service.

  • Closed Book

    Modern Refrigeration and Air Conditioning 21st Edition

    $140.00

    Modern Refrigeration and Air Conditioning is the HVACR standard for a new generation of learner. It correlates to HVAC Excellence and PAHRA accreditation requirements to ensure complete coverage that prepares students for career success. This edition has an improved instructional design, improved assessments, enhanced content on fundamentals, such as electrical theory and troubleshooting, and new digital assets that help students master knowledge, hands-on applications, and diagnostic skills. The revision also helps prepare students for employment and careers with new lab activities and features. Prepare your students for careers with new learning materials based upon the original HVACR industry standard.
    Follow-the-Heat™ Animations provide 63 short animations that introduce foundational concepts using simple, easily understood graphics and narrations.
    Troubleshooting Activities create an interactive experience designed to develop and promote troubleshooting techniques and logical diagnostic skills.
    New chapter on Electrical Troubleshooting, and expanded electrical coverage in the text and lab manual provide excellent coverage of essential information.
    Soft Skills for HVACR features emphasize the importance of workplace skills.
    Service Call Troubleshooting features present on-the-job service call situations.
    Full-color Lab Manual includes 35 new lab activities – including activities focusing on basic electrical skills and sheet metal construction.

  • Closed Book

    Modern Welding 2020

    $120.00

    Modern Welding is a comprehensive text that has long been the standard for teaching theory, fundamentals, equipment, and techniques of welding technology. This text provides thorough coverage of common welding and cutting processes, including gas tungsten arc welding, gas metal arc welding, flux-cored arc welding, shielded metal arc welding, oxyfuel gas welding and cutting, plasma arc cutting, and resistance welding of ferrous and non-ferrous metals. The text also includes extensive instruction in welding symbol interpretation, metallurgy and heat treatments, weld testing and inspection, and employment in the welding field.
    Prepares students for AWS SENSE Level 1 and Level 2 certification, with enough information to cover a two-year curriculum.
    Strong emphasis is placed on all aspects of safety, including respiratory protection, to ensure that safe practices are followed from education to career.
    Sections may be taught sequentially or independently, allowing for flexible customization to match your curriculum.
    Photos, art, and videos have been designed to convey maximum learning.