Choose a state

CMC Full Mechanical Contractor (2022-09-27)

Effective May 24, 2007, Senate Bill 0786 and HB 2122 requires plumbers to be pre approved prior to taking CMC (plumbing exam) and must show evidence of three (3) years experience. You must complete the “Exam Approval Request” form found on the Boards website: tn.gov/commerce/boards/contractors, and send to the Board office. Upon receipt, after the experience is confirmed, your information will be electronically submitted to PSI, and you can then schedule for the examination.
Questions - 120
Minimum Passing Score of 73%
Time Allowed - 325 Minutes

The reference material listed below was used to prepare the questions for this examination.  The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available.  For Code questions, the examinations will be based only on the edition of the Code book that is listed.

These products apply to test outline dated 2022-09-27

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin



Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.
In Stock These books are currently in stock.
Out of Stock These books are currently out of stock.

  • Open Book In Stock

    International Plumbing Code Turbo Tabs 2012

    Publication Year: 2012

    $18.00

    Flip through the 2012 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.

  • Open Book In Stock

    Blank Quick Reference Tabs

    $13.00

  • Open Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024

    Publication Year: 2024

    $32.00

    The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

  • Open Book In Stock

    Ugly's Electrical References 2023

    Publication Year: 2023

    $37.00

    Ugly’s Electrical References, 2023 Edition is the essential on-the-job reference tool for electrical industry professionals.

    The 2023 Edition provides the most pertinent, up-to-date information used by electricians, including updated NEC code and table change information; mathematical formulas; NEMA wiring configurations; conduit bending guide; ampacity and conduit fill information; transformer and control circuit wiring diagrams; and conversion tables.

    The 2023 Edition:
    • Reflects changes to the 2023 National Electrical Code (NEC)
    • Features expanded coverage of the following topics:
      • Full-load currents for 3-phase transformers
      • Maximum number of conductors in electrical metallic tubing for trade sizes 5 and 6
      • Equipment grounding conductors
      • General lighting loads for non-dwelling occupancies
  • Open Book In Stock

    NFPA 13: Standard for the Installation of Sprinkler Systems 2010

    Publication Year: 2010

    $120.04

    The 2010 NFPA 13: Installation of Sprinkler Systems is revised and updated with added criteria based on recent fire testing and studies performed by the Fire Protection Research Foundation. Chapter 20: Special Designs of Storage Protection presents requirements for the protection of three new special storage arrangements, including carton records storage with catwalk access, and high bay records storage. This edition also adopts the SEI/ASCE 7 approach for load calculations and introduces new zone-of-influence tables for Schedule 5 steel pipe, CPVC, and Type M copper tube. An important new method to calculate rack shelf area takes the placement of loads into consideration.

  • Open Book In Stock

    International Mechanical Code Turbo Tabs 2012

    $18.00

    Flip through the 2012 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.

  • Open Book In Stock

    ACCA Manual J: Residential Load Calculation

    8th Edition
    Publication Year: 2008

    $140.00

    Used to determine how much heating/cooling a home needs to stay cool and dry in the summer and warm in the winter. This load calculation process was developed by engineers in the heating and air conditioning industry and has been used for decades to accurately size heating and air-conditioning equipment. After completing this load calculation process, one can choose a properly sized piece of machinery to satisfy the load.

  • Open Book In Stock

    Pipefitter's Handbook, 1967 3rd Edition

    3rd Edition
    Publication Year: 1967

    $55.00

    Compact and pocket-sized, this handy reference contains thousands of facts and figures relevant to pipefitters, steamfitters-anyone concerned with layout and installation of pipe.

  • Open Book In Stock

    International Fuel Gas Code 2012

    Publication Year: 2012

    $75.00

    The 2012 INTERNATIONAL FUEL GAS CODE SOFTBOUND VERSION sets forth requirements that address the design and installation of fuel gas systems and gas-fired appliances, based on the most current information and technology available. The requirements are performance-driven, making this an effective tool and valuable addition to a user's code products.

  • Open Book In Stock

    International Plumbing Code 2012

    Publication Year: 2012

    $90.00

    With an emphasis on design and installation for optimum performance, the 2012 INTERNATIONAL PLUMBING CODE SOFTBOUND VERSION sets forth established requirements for plumbing systems. This important reference guide includes provisions for fixtures, piping, fittings, and devices, as well as design and installation methods for water supply, sanitary drainage, and storm drainage. The 2012 edition of the code includes the 2012 INTERNATIONAL PRIVATE SEWAGE DISPOSAL CODE, a companion guide that offers additional provisions for the design, installation, and inspection of private sewage disposal systems. Using both prescriptive- and performance-related specifications, this code provides comprehensive minimum regulations for a variety of plumbing facilities, facilitating the design and acceptance of new and innovative products, materials, and systems.

  • Open Book Out of Stock

    HVAC Duct Construction Standards, Metal and Flexible

    $300.00

    The third edition of the HVAC Duct Construction Standards – Metal and Flexible is intended primarily for commercial and institutional duct construction. This American National Standard contains tables and details for constructing ductwork for ½" to 10" wg positive and negative pressures. This edition improves upon the second edition with expanded pressure class tables, separate tables for TDC/TDF construction and expanded tables for round duct construction including 6" wg positive and negative pressure and sizes up to 96". New in this edition is an engineering and design chapter to provide additional information to design professionals, double-wall construction details, new casing construction details and additional accessory items. The standard is applicable for construction using uncoated steel, galvanized and stainless steels and a limited range of aluminum ducts. This standard has been adopted in the ICC International Mechanical Code.

  • Open Book In Stock

    Carrier System Design Manual Part 3 - Piping Design

    Publication Year: 1973

    $76.00

    This part of the System Design Manual presents data and examples to guide the engineer in practical design and layout of normal air conditioning piping systems.

  • Open Book In Stock

    ACCA Manual N: Load Calculation for Commercial Summer and Winter Air Conditioning

    5th Edition
    Publication Year: 2008

    $125.00

    ACCA's latest update of the Manual N light commercial method, Wrightsoft's Right-N is a simple, clear, logical, yet very sophisticated program to help you compute your calculations quickly and accurately.

  • Open Book In Stock

    International Fuel Gas Code Turbo Tabs 2012

    $18.00

    Flip through the 2012 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.

  • Open Book In Stock

    International Mechanical Code 2012

    Publication Year: 2012

    $90.00

    For the most current mechanical codes that address the design and installation of the most current mechanical systems, use the 2012 INTERNATIONAL MECHANICAL CODE SOFTBOUND VERSION. Designed to provide comprehensive regulations for mechanical systems and equipment, it includes coverage of HVAC, exhaust systems, chimneys and vents, ducts, appliances, boilers, water heaters, refrigerators, hydronic piping, and solar systems. This valuable reference uses prescriptive- and performance- related provisions to establish minimum regulations for a variety of systems.

  • Open Book In Stock

    Modern Refrigeration and Air Conditioning 21st Edition

    21st Edition

    $170.00

    Modern Refrigeration and Air Conditioning is the HVACR standard for a new generation of learner. It correlates to HVAC Excellence and PAHRA accreditation requirements to ensure complete coverage that prepares students for career success. This edition has an improved instructional design, improved assessments, enhanced content on fundamentals, such as electrical theory and troubleshooting, and new digital assets that help students master knowledge, hands-on applications, and diagnostic skills. The revision also helps prepare students for employment and careers with new lab activities and features. Prepare your students for careers with new learning materials based upon the original HVACR industry standard.
    Follow-the-Heat™ Animations provide 63 short animations that introduce foundational concepts using simple, easily understood graphics and narrations.
    Troubleshooting Activities create an interactive experience designed to develop and promote troubleshooting techniques and logical diagnostic skills.
    New chapter on Electrical Troubleshooting, and expanded electrical coverage in the text and lab manual provide excellent coverage of essential information.
    Soft Skills for HVACR features emphasize the importance of workplace skills.
    Service Call Troubleshooting features present on-the-job service call situations.
    Full-color Lab Manual includes 35 new lab activities – including activities focusing on basic electrical skills and sheet metal construction.

  • Open Book In Stock

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2023

    $29.50

    All Federal Construction Regulations (29 CFR 1926) are included in this “perfect bound” book in an easy-to-read, two-color layout.

    All 29 CFR 1926 regulations for construction industry are included along with the following items:

    29 CFR 1903 regulations covering inspections, citations, and penalties
    29 CFR 1904 regulations covering recording and reporting occupational injuries and illnesses
    OSHA keyword dictionary
    Easy to find OSHA interpretations