CR-3 Awnings Canopies and Patio Covers

This classification allows the scopes of work permitted by the commercial C-3 Awnings, Canopies, and Patio Covers and the residential R-3 Awnings, Canopies, and Patio Covers licenses

C-3 AWNINGS, CANOPIES, AND PATIO COVERS: This classification allows the licensee to place concrete footings and concrete slabs as required for the licensee to install and repair:
1. Window awnings
2. Door hoods
3. Freestanding or attached canopies
4. Carport and patio covers constructed of metal, fabric, fiberglass, or plastic
5. Screened and paneled enclosures, which are not intended for use as habitable spaces, using metal panels, plastic inserts, and screen doors. A minimum of 60% of the wall area of an enclosure shall be constructed of screening material.
6. Fascia panels
7. Flashing and skirting
8. Exterior, detached metal storage units not to exceed 120 square feet

This classification does not allow the licensee to install or repair electrical, plumbing, or air conditioning systems.

R-3 AWNINGS, CANOPIES, AND PATIO COVERS: This classification allows the licensee to place concrete footings and concrete slabs as required for the licensee to install and repair:
1. Window awnings
2. Door hoods
3. Freestanding or attached canopies
4. Carport and patio covers constructed of metal, fabric, fiberglass, or plastic
5. Screened and paneled enclosures, which are not intended for use as habitable spaces, using metal panels, plastic inserts, and screen doors. A mini-mum of 60% of the wall area of an enclosure shall be constructed of screening material.
6. Fascia panels
7. Flashing and skirting
8. Exterior, detached metal storage units, not to exceed 200 square feet This classification does not allow the licensee to install or repair electrical, plumbing, or air conditioning systems

The reference material listed below was used to prepare the questions for this examination. The examination may also contain questions based on trade knowledge or general industry practices. Except for Code books, you can base your answers on later editions of references as they become available. For Code questions, the examinations will be based only on the edition of the Code book that is listed.

Open Book In Stock

Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2024

Publication Year: 2024

$32.00

The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.
Open Book Out of Stock

NRCA Roofing Manual: Metal Panel And SPF Roof Systems 2024

2024 Edition

$275.00

The most recent edition of the NRCA Roofing Manual furnishes you with extensive details regarding the design, materials, and installation methods relevant to metal panel and spray polyurethane foam roof systems employed in both low and steep-slope applications. With its two comprehensive sections, Metal Panel Roof Systems and SPF Roof Systems, this manual serves as a valuable supplement to your technical library.
Open Book In Stock

Architectural Sheet Metal Manual, 7th Edition

Publication Year: 2012
7th Edition

$260.00

The Architectural Sheet Metal Manual is the most comprehensive set of resources recommended for practices available for proper design and installation of custom-fabricated architectural sheet metal including roof drainage system design for scuppers, gutters and downspouts.
Open Book In Stock

Carpentry and Building Construction, 2016 Student Edition

Publication Year: 2016

$105.00

**IN STOCK**

Carpentry & Building Construction is a comprehensive carpentry program that focuses on residential construction with many procedures also applying to light commercial construction. The informative text provides detailed, heavily illustrated information about materials, tools, and processes, with many step-by-step procedures.
Open Book In Stock

International Residential Code for One and Two Family Dwellings 2015

Publication Year: 2015

$160.00

This comprehensive code compiles all building, plumbing, mechanical, fuel gas and electrical requirements for non-commercial one- and two-family dwellings in one convenient code. The regulations cover dwellings and townhouses up to three stories.
Open Book In Stock

International Building Code 2015

Publication Year: 2015

$160.00

The scope of the International Building Code (IBC) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories.
Open Book In Stock

Gypsum Construction Handbook 7th Edtion

Publication Year: 2014

$75.00

The tried-and-true Gypsum Construction Handbook is a systematic guide to selecting and using gypsum drywall, veneer plaster, tile backers, ceilings, and conventional plaster building materials. A widely respected training text for aspiring architects and engineers, the book provides detailed product information and efficient installation methodology. The Seventh Edition features updates in gypsum products, including ultralight panels, glass-mat panels, paperfaced plastic bead, and ultralightweight joint compound, and modern specialty acoustical and ceiling product guidelines. This comprehensive reference also incorporates the latest in sustainable products.
Open Book In Stock

NRCA Roofing Manual: Steep-Slope Roof Systems 2021

Publication Year: 2021

$240.00

The latest volume of the NRCA Roofing Manual provides you with valuable information about the design, materials and installation techniques applicable to steep-slope roof system applications. With five comprehensive sections—Asphalt Shingle Roof Systems, Clay and Concrete Tile Roof Systems, Metal Shingle Roof Systems, Slate Roof Systems, and Wood Shake and Wood Shingle Roof Systems—this manual is a welcome addition to your technical library.

Each section includes in-depth information about roof assembly configurations, roof decks, underlayments, materials, design and installation. Construction details are provided in each section as follows:
Asphalt Shingle Roof Systems: 24 construction details
Clay and Concrete Tile Roof Systems: 92 construction details
Metal Shingle Roof Systems: 20 construction details
Slate Roof Systems: 22 construction details
Wood Shake and Wood Shingle Roof Systems: 76 construction details
Open Book In Stock

Blank Quick Reference Tabs

$13.00