G-1 Limited Natural and LP Gas Contractor (2023-05-01)

Flip through the 2021 IMC and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.

Loose Leaf Tabs Contain: Full-page inserts tabs that have the key code sections printed on them in an easy-to-read format.

Soft Cover Tabs Contain: Clear plastic, self-adhesive tabs that have the key sections of the code printed on them in an easy-to-read format.

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design.

Important changes in the edition include:

Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building.
Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits.
Fire and smoke dampers must be provided with approved access for inspection and maintenance.
Refrigerant tables updated to include new refrigerants.
Addition of condensate termination identification markings and discharge restrictions.
Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement.
30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems.
Continuous operation requirement for manicure and pedicure station exhaust systems.
Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

With the steady rise in the use of cost-effective natural gas vehicles, it's critical to have access to the complete range of requirements for designing, installing, operating, and maintaining compressed natural gas (CNG) and liquefied natural gas (LNG) engine fuel systems and dispensing systems. The newest edition of NFPA 52, Vehicular Natural Gas Fuel Systems Code, offers in-depth instruction for helping to safeguard people and installations in a user-friendly format that’s easy to navigate and comprehend.

An essential for designers, engineers, maintenance professionals, facilities managers, contractors, and authorities having jurisdiction, NFPA 52 covers CNG and LNG systems on all types of vehicles and applies to facilities with LNG storage in containers of 100,000 gallons or less.

Liquefied Petroleum Gas Code provides minimum safety requirements for all liquefied petroleum gas (propane) installations, from small cylinders installed at residences to large bulk storage facilities that can exceed 100,000 gallons. The code includes minimum requirements for safe handling during LP gas transfer, including operator qualifications, maximum filling quantity in containers, and pre-transfer inspections to ensure containers are fit for continued service.

Fully updated and featuring new full-color photos, NFPA®'s 2012 National Fuel Gas Code Handbook explains technical NFPA 54 rules and fuel gas safety concepts -- so you're prepared to answer questions from employees and owners; and verify fuel gas piping, appliance, and venting jobs are in compliance.The only complete guide to the 2012 NFPA 54 Code, the Handbook is written by industry authorities including Franklin Switzer, Jr., President of S-afe, Inc., NFPA Senior Engineer Denise Beach, Paul Cabot of the American Gas Association, and John Roberts from Rimkus Consulting Group.

2021 International Fuel Gas Code addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.

Flip through the 2021 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.

Loose Leaf Tabs Contain: Full-page inserts tabs that have the key code sections printed on them in an easy-to-read format.

Soft Cover Tabs Contain: Clear plastic, self-adhesive tabs that have the key sections of the code printed on them in an easy-to-read format. The soft cover tabs can also be used in the 2021 I-Code Commentary series.

The OSHA 29 CFR 1926 Construction Regulations book offers convenient access to vital safety guidance for both employers and employees, aiding in the prompt identification of potential hazards on any job site. Its user-friendly design features a two-color layout, simplifying navigation and comprehension of regulations. It encompasses all 1926 regulations, along with 1903 regulations on inspections, citations, and penalties, as well as 1904 regulations concerning record keeping and reporting of occupational injuries and illnesses. Additionally, select 1910 regulations relevant to construction industries are included. The book highlights regulation changes between releases and provides easy-to-access OSHA interpretations, aiding in clarity and reference. Essential documents such as OSHA Form 300 and the Cancer Policy are incorporated. In-Cite Referencing to applicable 1910 regulations is provided for further context. Lastly, the book outlines the Most Frequently Cited Standards preceding relevant Subparts, enhancing its utility as a comprehensive safety resource.

Without proper safety protocols in place, charging or evacuating flammable gas piping systems can be a dangerous endeavor. NFPA 56: Standard for Fire and Explosion Prevention During Cleaning and Purging of Flammable Gas Piping Systemsprovides a valuable foundation for making safety-related decisions while developing procedures for these activities.