Choose a state

Heavy Construction (2017-04-17)

Sewer, water and gas pipelines, grading and excavation, paving and plant construction.

Number of Questions - 100
Minimum Passing Score - 70%
Time Allowed - 4 Hours

These products apply to test outline dated 2017-04-17

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin

Email this page to a friend

Your Name:
Friend's Email Address:

Add a message:




Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.

  • Open Book

    ASME B31.8 Gas Transmission and Distribution Systems 2007

    Publication Year: 2007

    $248.55

    This code prescribes comprehensive solutions for materials, design, fabrication, assembly, erection, testing and inspection. It also serves as a companion to ASME's other B31 codes on piping systems. Together, they remain essential references for anyone engaged with piping.
  • Closed Book

    Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders

    3rd Edition
    Publication Year: March 2006

    $34.25

    This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.
  • Closed Book

    Pipe and Excavation Contracting 2011

    Publication Year: 2011

    $34.00

    This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.
  • Closed Book

    Placing Reinforcing Bars, Recommended Practices

    9th Edition
    Publication Year: 2011

    $70.12

    More then any other material of construction, concrete depends for its performance on the skill and understanding of the man on the job. Since this applies particularly to reinforced concrete construction, it will be a matter of great interest to all contractors a now handbook entitled "CRSI Recommended Practice for Placeing Reinforcing Bars." The book was prepared under the direction of the Engineering Proactive Committee of the Concrete Reinforcing Steel Institute by R. C. Reese. The book answers hundreds of questions. Some examples are: how many standard sizes of reinforcing bars are now being rolled; what are stirrups and why are they used; why are column spirals used and related issues.
  • Closed Book

    Design and Control of Concrete Mixtures 2015

    15th Edition

    $110.75

    Design and Control of Concrete Mixtures--The Guide to Applications, Methods, and Materials, has been the industry’s primary reference on concrete technology for over 85 years This fully revised 15th edition is a concise, current reference on concrete, that includes the many advances that occurred since the last edition was published in 2002. The text is backed by over 95 years of research by the Portland Cement Association. It reflects the latest information on standards, specifications, test methods and guides of ASTM International (ASTM), the American Association of State Highway and Transportation Officials (AASHTO), the American Concrete Institute (ACI), and the National Ready Mixed Concrete Association (NRMCA). "Think Harder Concrete"!
  • Closed Book

    Hot-Mix Asphalt Paving Handbook

    2nd Edition
    Publication Year: 2000

    $125.00

    This second edition covers state-of-the-art asphalt paving, plant operations, transportation of materials, surface preparation, lay down, compaction, and quality control processes. It is aimed at field personnel who are responsible for these operations—both contractor personnel who do the work and agency personnel who oversee and inspect the work.
  • Open Book

    Blank Quick Reference Tabs

    $10.16

  • Closed Book

    Formwork for Concrete

    7th Edition

    $205.85

    This document serves a broad range of information needs with the objective of improving quality, safety, and economy in all types of formwork. For the experienced designer or builder of formwork, it is a ready reference on material properties, design data, and construction suggestions. For the architect or engineer, it adds guidance relating to structural design details and the problems and possibilities of executing them in formwork. For the novice, the book explains basic design principles and provides an introduction to many common formwork practices. This edition includes new material on single-sided wall forms, insulating concrete forms, pressure formulas with coefficients for differing weights and mix chemistries, inflated forming methods, and expanded text on multistory shoring systems.
  • Closed Book

    DIPRA Installation Guide for Ductile Iron Pipe

    Publication Year: 2015

    $15.00

    This book is full of useful information for designers and installers of Ductile Iron pipe. It covers many aspects of pipeline installation such as receiving and handling, trenching, installing, back-filling, testing and disinfecting, and service taps. It also contains a variety of useful miscellaneous information such as a listing of Ductile Iron pipe standards, common conversion factors and dimensions, and weights of push-on and mechanical joint pipe. A convenient pocket-size version of this Guide is available.
  • Closed Book

    Pipe Welding Procedures

    2nd Edition
    Publication Year: 2003

    $50.78

    A standard reference for decades, this new edition of Pipe Welding Procedures continues to reinforce the welder's understanding of procedures. Drawing on his extensive practical and teaching experience in the field, the author describes in detail the manipulating procedures used to weld pipe joints. You will find useful information on heat input and distribution, essentials of shielded metal-arc technology, distortion, pipe welding defects, welding safety, essentials of welding metallurgy, and qualification of the welding procedure and the welder.
  • Closed Book

    Pipefitter's Handbook, 1967 3rd Edition

    3rd Edition
    Publication Year: 1967

    $35.45

    Compact and pocket-sized, this handy reference contains thousands of facts and figures relevant to pipefitters, steamfitters-anyone concerned with layout and installation of pipe.
  • Closed Book

    Instructional Manual for Training and Certification of Steel Personnel

    Publication Year: 1999
    3rd Edition

    $91.56

    This instructional manual has been prepared by the Post-Tensioning Institute's Committee for Training and Certification of Field Personnel for Unbonded Post-Tensioning soley as a recommended general guide and assistance to the placement, installation and inspection of unbonded single strand post-tensioning systems, the operation of stressing equipment, and accessories.
  • Closed Book

    Concrete Pipe and Box Culvert Installation Manual 2015

    Publication Year: 2015

    $25.00

  • Closed Book

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2017

    Publication Year: 2017

    $26.78

    Make compliance with dense government safety regulations simple with MANCOMM’s 29 CFR 1926 OSHA Construction Industry Regulations. Updated through January 2017, the book provides you with a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.