Choose a state

Industrialized Building Contracting (2016-01-12)

Industrialized Building Contracting (Abbr: IBC) means that service that provides for the installation or removal of an industrialized building as defined in the Virginia Industrialized Building Safety Regulations. This classification covers foundation work in accordance with the provisions of the USBC and allows the licensee to complete internal tie-ins of plumbing, gas, electrical, and HVAC systems. It does not allow for installing additional plumbing, gas, electrical, or HVAC work such as installing the service meter, or installing the outside compressor for the HVAC system. The BLD classification also provides for this function.

Questions - 50
Minimum Passing Score of 70%
Time Allowed - 120 Minutes

These products apply to test outline dated 2016-01-12

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin

Email this page to a friend

Your Name:
Friend's Email Address:

Add a message:




Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.

  • Open Book

    SDI (Steel Deck Institute) Manual Of Construction With Steel

    Publication Year: 2006
    2nd Edition

    $42.00

    August 2006 Second Edition-2006-Easy to read and follow. This publication reviews good practice in Steel Deck Construction and serves as a safety primer for Contractors, Erectors, Architects, Engineers and Inspectors who are responsible for safe and proper field installation of steel deck.
  • Open Book

    Technical Digest No. 9 - Handling and Erection of Steel Joists and Joist Girders

    3rd Edition
    Publication Year: March 2006

    $34.25

    This updated Technical Digest contains a thorough coverage of the proper handling and erection procedures to be employed in the field to make certain that SJI joist products are not damaged, that they perform as specified, and above all, to ensure the safety of the erectors. The digest includes descriptions of the standard products: K-Series joists, LH/DLH-Series joists, Joist Girders and now CJ-Series joists, how joist products are prepared, tagged, loaded and shipped from the joist manufacturer’s plant, how they are to be unloaded and stored at the job site, how the joist products are to be erected including bridging, and field inspection. Other topics covered in the digest are penalized erection and common field issues. This edition contains information related to the newest standard joist product, the CJ-Series joists that were introduced in 2007. It also includes updated information on Bridging in Chapter 8 as well as some additional topics added to the list of Miscellaneous Topics - Common Field Issues in Chapter 9. General contractors, steel erectors, inspectors, and building officials would most benefit from this Technical Digest. Engineers and Architects would also benefit from the information contained in the digest if part of their responsibilities is to oversee joist and Joist Girder projects under construction.
  • Open Book

    Pipe and Excavation Contracting 2011

    Publication Year: 2011

    $34.00

    This popular manual has been updated and improved to bring it more current with modern earth moving and trenching equipment, refined excavation techniques, stricter safety rules, and improved materials. Here you’ll find how to enter and succeed in the underground utility business. Includes hands-on instructions for operating the equipment and doing the trenching, pipe laying and connecting work and answers to what causes so many skilled equipment operators and pipe layers to fail when they try to start their own business.
  • Open Book

    Placing Reinforcing Bars, Recommended Practices

    9th Edition
    Publication Year: 2011

    $70.12

    More then any other material of construction, concrete depends for its performance on the skill and understanding of the man on the job. Since this applies particularly to reinforced concrete construction, it will be a matter of great interest to all contractors a now handbook entitled "CRSI Recommended Practice for Placeing Reinforcing Bars." The book was prepared under the direction of the Engineering Proactive Committee of the Concrete Reinforcing Steel Institute by R. C. Reese. The book answers hundreds of questions. Some examples are: how many standard sizes of reinforcing bars are now being rolled; what are stirrups and why are they used; why are column spirals used and related issues.
  • Open Book

    ASME B30.3 - Construction Tower Cranes

    2012 Edition

    $63.25

    B30.3 applies to “construction tower cranes” and “permanently mounted tower cranes” that are powered by electric motors or internal combustion engines and that adjust their operating radius by means of a luffing boom mechanism, a trolley traversing a horizontal jib, or a combination of the two. The cranes may be mounted on “fixed bases” or “traveling bases” and may have tower and supporting structure arrangements that permit the crane to climb in a structure being built or that permits’ increasing the crane’s tower height as the structure rises. Variations of the above physical characteristics that provide the same fundamental operating characteristics are included in the scope of this Volume however, the requirements of this Volume are only applicable to the cranes within this scope when they are used in lifting operations. Mobile cranes configured with tower attachments (refer to ASME B30.5) and self-erecting tower cranes (refer to ASME B30.29) are not within the scope of this Volume.
  • Open Book

    ASME B30.4 - Portal and Pedestal Cranes

    2010 Edition

    $67.85

    B30.4 applies to the construction, installation, operation, inspection, and maintenance of electric motor or internal-combustion engine powred portal and pedestal cranes, that adjust operating radius by means of a boom luffing mechanism or by means of a trolley traversing a horizontal boom, that may be mounted on a fixed or traveling base, and to any variation thereof that retain the same fundamental characteristics. This standard applies only to portal and pedestal cranes utilizing a drum and wire rope for hoisting and which are used for hoisting work. The requirements for tower cranes (refer to ASME B30.3), telescopic boom cranes (refer to ASME B30.5), and knuckleboom cranes (refer to ASME B30.22) are not included in this standard.
  • Open Book

    Virginia Uniform Statewide Building Code, 2012

    2012 Edition

    $24.50

    Volume I (Construction Code), II (Rehabilitation Code) & III (Maintenance Code)
  • Open Book

    ASME B30.5 Mobile and Locomotive Cranes

    Publication Year: 2007
    Edition

    $97.75

    ASME B30.5 is widely respected and applied throughout the building and construction industry. It addresses crawler cranes, locomotive cranes, wheel-mounted cranes, and any variations thereof that retain the same fundamental characteristics and are powered by internal combustion engines or electric motors. The scope of this Safety Standard includes only cranes of the above types that are powered by internal combustion engines or electric motors. Side boom tractors and cranes designed for railway and automobile wreck clearance, digger derricks, cranes manufactured specifically for, or when used for, energized electrical line service, knuckle boom, trolley boom cranes, and cranes having a maximum rated capacity of one ton or less are excluded.
  • Open Book

    Handbook of Rigging: For Construction and Industrial Operations

    Publication Year: 2009
    5th Edition

    $110.95

    Since 1957 successive editions of the Handbook of Rigging for Construction and Industrial Operations have delivered proven solutions for erecting reliable rigs and scaffolds for plants and factories, loading docks, mines and ports, and construction and demolition sites. Complete with extensive coverage of relevant OSHA regulations plus the author's own expert advice on safe practices, this definitive guide shows you how to select and use: rigging tools--fiber and wire-strand rope, slings and hitches, end attachments and fittings, and blocks, sheaves, reeving, and drums-scaffolding and ladders--both manual and powered swinging and suspended scaffolds, wood and metal stationary scaffolds, specialized scaffolds, and portable ladders, rigging machinery--derricks and cranes, overhead hoists, personnel/material hoists, and helicopters, rigging accessories--jacks, rollers, and skids plus safety belts, lifelines, and nets.
  • Open Book

    ASME B30.10 - Hooks

    2009 Edition

    $66.70

    B30.10 includes provisions that apply to hooks used for lifting and load handling purposes, in conjunction with equipment described in other volumes of the B30 Standard. Hooks supporting a load in the base (bowl/saddle or pin hole) of the hook, are covered in Chapter 10-1. Hooks that may be loaded in other than the base (bowl/saddle or pin hole)are covered in Chapter 10-2. This safety standard offers comprehensive solutions applying to the fabrication, attachment, use, inspection, and maintenance of this equipment.
  • Open Book

    International Building Code Turbo Tabs 2012

    Publication Year: 2012

    $15.00

    Flip through the 2012 I-Codes series and find frequently used sections fast! You'll be surprised how easy it is to find what you are looking for. These tabs were created by industry experts who carefully identified the most referenced sections in the code.
  • Open Book

    International Building Code 2012

    Publication Year: 2012

    $115.00

  • Open Book

    Carpentry and Building Construction, 2016 Student Edition

    Publication Year: 2016

    $68.00

  • Open Book

    Code of Federal Regulations, 29 CFR Part 1926 (OSHA) 2017

    Publication Year: 2017

    $26.78

    Make compliance with dense government safety regulations simple with MANCOMM’s 29 CFR 1926 OSHA Construction Industry Regulations. Updated through January 2017, the book provides you with a comprehensive set of the most up-to-date Construction regulations. Utilizing MANCOMM’s signature formatting approach – RegLogic – this edition includes notations for changes within the past year and letters of reference.