Choose a state

Air Conditioning and Refrigeration, Including Solar (Residential/Commercial) (2018-10-23)

 

R-39 Air Conditioning and Refrigeration, Including Solar Scope – Installation and repair of comfort air conditioning systems, including refrigeration, evaporative cooling, ventilating and heating with or without solar equipment. Installation and repair of machinery, units, accessories, refrigerator rooms, and insulated refrigerated spaces, and controls in refrigerators. If necessary, a new circuit may be added to the existing service panel or sub-panel. Excluded is the installation of a new service panel or sub-panel.

C-79 Air Conditioning and Refrigeration, Including Solar Scope – Installation, alteration, and repair of refrigeration and evaporative cooling systems.

Installation, alteration, and repair of heating systems of "wet", "dry" or radiant type. "Wet" systems include steam or hot water boilers and coils, or baseboard convectors, and are limited to 30 PSIG operating pressure of 220° F for hot water and 15 PSIG operating pressure for steam. Dry systems include gas fired furnaces and space heaters.

Installation, alteration, and repair of ventilation systems includes duct work, air filtering devices, water treatment devices, pneumatic or electrical controls, and control piping. Thermal and acoustical insulation of refrigerant pipes and ductwork, vibration isolation materials and devices, liquid fuel piping and tanks, water and gas piping from service connection to the equipment it serves. Testing and balancing of refrigerant, cooling, heating circuits, and air handling systems.

If necessary, a new circuit may be added to the existing service panel or subpanel. Excluded is the installation of a new service panel or subpanel. 

C39/L79 Test 80 Questions
70% Minimum Passing Score
210 Minutes Time Allowed

Solar Test
30 Questions
70% Minimum Passing Score
75 Minutes Time Allowed

Sign Up for Exam Prep
These products apply to test outline dated 2018-10-23

Click Here to View the Candidate Information Bulletin Click Here to View the Candidate Information Bulletin

Email this page to a friend

Your Name:
Friend's Email Address:

Add a message:




Open Book These books are allowed while taking your test.
Closed Book These books are for pre-test study only and are not available for use during the test.

  • Closed Book

    Low Pressure Boilers 5th Edition

    $94.00

    Low Pressure Boilers is the leading resource for preparing for low pressure boiler operator and facility operating engineer licensing. This textbook provides a comprehensive overview of the latest information on the safe and efficient operation of low pressure steam and hot water boilers, cooling systems, and related equipment. Each chapter is divided into sections to aid comprehension of key concepts. To assist with preparing for a licensing exam, a separate chapter with test-taking tips and a sample exam is included.

  • Open Book

    International Fuel Gas Code Turbo Tabs 2018

    Publication Year: 2018

    $15.62

    2018 IFGC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Fuel Gas Code printed on them in an easy-to-read format. Can be used with either the 2018 International Fuel Gas Code or the 2012 IFGC Code and Commentary.

  • Open Book

    International Mechanical Code 2018 Turbo Tabs

    Publication Year: 2018

    $15.62

    2018 IMC Turbo Tabs consist of clear plastic self-adhesive tabs that have key sections of the 2018 International Mechanical Code printed on them in an easy-to-read format. Can be used with either the 2018 International Mechanical Code or the 2018 IMC Code and Commentary.

  • Open Book

    International Fuel Gas Code 2018

    Publication Year: 2018

    $75.25

    2018 International Fuel Gas Code addresses the design and installation of fuel gas systems and gas-fired appliances through requirements that emphasize performance.

  • Open Book

    International Mechanical Code 2018

    Publication Year: 2018

    $75.25

    2018 International Mechanical Code establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The code was developed with broad-based principles that make possible the use of new materials, methods, and design.

     

  • Open Book

    Blank Quick Reference Tabs

    $10.16

  • Closed Book

    ACCA Manual D: Residential Duct Systems

    Publication Year: 2009

    $115.00

    The ANSI-recognized national standard for residential HVAC duct design will help you design a duct system in less time. The popular and accurate procedure has been revised to include updated and expanded VAV guidance, with detailed examples; impacts of excess length, sag and compression in flexible ducts; and new equivalent length values for flex duct junction boxes. Manual D, from the Air Conditioning Contractors of America (ACCA), provides a single set of ANSI-recognized duct sizing principles and calculations that apply to all duct materials.

  • Closed Book

    Solar Water and Pool Heating Design and Installation Manual

    Rev 1992 Edition
    Publication Year: 1997

    $10.00

    The intent of this manual is to equip the reader with the knowledge and skills needed todesign, install, operate and maintain the most common types of solar water heating systems.The manual serves as the textbook for the solar thermal course sponsored and conducted bythe Florida Solar Energy Center. It also functions as a study guide for those intending to takelicensing or certification exams.The manual presents an overview of solar thermal applications, provides basic informationon the principles of solar energy, reviews solar thermal technologies, and provides detailedinstruction on the safe, efficient installation of solar water heating and pool heating systems.The manual is divided into six sections, with each separated into individual modules.

  • Closed Book

    Modern Refrigeration and Air Conditioning 20th Edition

    20th Edition

    $135.00

    Modern Refrigeration and Air Conditioning is the HVACR standard for a new generation of learner. Whether you're in a digital or print, on-ground or hybrid environment, this integrated learning solution will engage students with resource elements including textbook content, an online learning platform, video clips, narrated animations, digital activities, questions, and hands-on lab activities to assess and to reinforce learning based upon the original HVACR industry standard.